Wuqiang County Huili Fiberglass Co., Ltd.
Wuqiang County Huili Fiberglass Co., Ltd produce fiberglass insect screen, fiberglass mesh,polyester/fiberglass pleated mesh,etc.
Add to Cart
Product Description
Adhesive Fiber glass Mesh Tape is woven from C-fiberglass yarn, then coated with adhesive acrylic latex.Save
considerable time and eliminate one step of mudding when combining the self adhesive mesh tape with a setting
compound. This product has good performances like good softness, high stickiness, and easy application.Used to
cover seams in the process of drywall construction, also be used to wall and ceiling problems, seal corners where
two sections of drywall meet.
Specification
| Density | 65±3g/㎡ | 75±3g/㎡ |
| Raw Fabric | 45g/㎡ | 55g/㎡ |
| Glue Content | 30% | 30% |
| Glue Type | Adhesive latex | Adhesive latex |
| Moisture | 0.5% | 0.5% |
| Mesh Size | 8*8/inch | 9*9/inch |
| Tensile Strength | 600n/50mm | 600n/50mm |
Application Method
The use is easy and fast, no pre-plastering required, no bubbles. It is used to cover or repair joints, cracks and holes on walls, roofs, etc.
1. Wall must be clean and dry.
2. Center and apply tape over the length of the joint and pressing firmly.
3. Apply a generous first coat of compound over the tape and through the mesh, making sure to completely fill the joint crevice. When the joint has been completely filled, wipe off any excess compound with the drywall knife leaving enough fill the joint crevice. Let dry completely ,then sand slightly.
4. Apply sufficient thin finishing coats to produce a smooth wall surface.
5. Cut of butted do not have a tapered edge. Therefore, special care must be taken to assure proper compound that will require an increased amount of edge feathering.
Supply Ability
10000rolls per day
Packing&Delivery
Each roll with pvc shrink packaging,24rolls ,36 rolls or 72rolls per carton.
